Industrial Systems Technology, AAS (IS13) (470303)  Degree


Campus Locations: Tifton, Bainbridge

The Industrial Systems Technology Degree program is designed for the student who wishes to prepare for a career as an Industrial Systems technician/electrician. The program provides learning opportunities that introduce, develop and reinforce academic and technical knowledge, skill, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to retrain or upgrade present knowledge and skill. The degree program teaches skills in Industrial Systems Technology providing background skills in several areas of industrial maintenance including electronics, industrial wiring, motors, controls, PLC's, instrumentation, fluid power, mechanical, pumps and piping, and computers. Graduates of the program receive an Industrial Systems Technology Degree that qualifies them for employment as industrial electricians or industrial systems technicians.

Length of Program: Four (4) Semesters

Entrance Date: Beginning of each semester.

Entrance Requirements: Refer to Admission criteria.

Age: Applicant must be 16 years of age or older.

Education: An applicant must be a high school graduate or the equivalent (GED). College transcripts will be evaluated on an individual basis.

Advisor: A program advisor should be consulted prior to enrolling in any course. An advisor will be assigned by admissions.

Program Final Exit Point: Industrial Systems Technology, Associate of Applied Science.

Credits Required for Graduation: 66 minimum semester hour credits required for graduation.

Curriculum Outline (84 hours)
General Education Courses 15
Area I: Language Arts/Communication 3
ENGL 1101

Co-requisite(s): ENGL 0090 and/or Entrance exam reading and writing scores in accordance with approved TCSG admission score levels. Explores the analysis of literature and articles about issues in the humanities and in society. Students practice various modes of writing, ranging from exposition to argumentation and persuasion. The course includes a review of standard grammatical and stylistic usage in proofreading and editing. An introduction to library resources lays the foundation for research. Topics include writing analysis and practice, revision, and research. Students write a research paper using library resources and using a formatting and documentation style appropriate to the purpose and audience.

3
Area II: Social/Behavioral Sciences 3
Social/Behavioral Science Elective 0000Social/Behavioral Sciences 3
Area III: Natural Sciences/Mathematics (Choose One) 3
MATH 1103

This course focuses on quantitive skills and reasoning in the context of experiences that students will be likely to encounter. The course emphasizes processing information in context from a variety of representations, understanding of both the information and the processing, and understanding which conclusions can be reasonably determined. Students will use appropriate technology to enhance mathematical thinking and understanding. Topics covered in this course include: sets and set operations, logic, basic probability, data analysis, linear models, quadratic models, exponential and logarithmic models, geometry, and financial management.

3
MATH 1101

Pre-requisite(s): Appropriate Placement Test Score or Co-requisite MATH 0090. Emphasizes functions using real-world applications as models. Topics include fundamental concepts of algebra; functions and graphs; linear, quadratic, polynomial, exponential, and logarithmic functions and models; systems of equations; and optional topics in algebra.

3
MATH 1111

Co-requisite(s): Appropriate Placement Test Score or Co-requisite MATH 0090 Emphasizes techniques of problem solving using algebraic concepts. Topics include fundamental concepts of algebra, equations and inequalities, functions and graphs, and systems of equations; optional topics include sequences, series, and probability or analytic geometry.

3
Area IV: Humanities/Fine Arts 3
Humanities/Fine Arts 0000Humanities/Fine Arts Elective 3
Institutional Credit 3
COLL 1500

This course is designed to provide tools to assist students to acquire skills necessary to achieve academic and professional success in their chosen occupational/ technical program of study. Topics include: Getting off to a Good Start, Learning and Personality Styles, Time and Money Management, Study and Test Taking Skills, Stress Management and Wellness, Communications Skills, Career Exploration, Research Skills, College Campus Knowledge, Memory & Reading Skills, Presentation & Interview Skills, and Group Skills. Effective Fall 2016, students who already have an Associate Degree or higher will be given exemption credit for the COLL 1500 course.

3
Occupational Courses 48
IDSY 1110

This course introduces the fundamental concepts, principles, and devices involved in industrial motor controls,theories and applications of single and three-phase motors, wiring motor control circuits, and magnetic starters and braking. Topics include, but are not limited to, motor theory and operating principles, control devices, symbols and schematic diagrams, NEMA standards, Article 430 NEC and preventative maintenance and troubleshooting.

4
IDSY 1120

This course introduces the operational theory, systems terminology, PLC installation, and programming procedures for Programmable Logic Controllers. Emphasis is placed on PLC programming, connections, installation, and start-up procedures. Other topics include timers and counters, relay logic instructions, and hardware and software applications.

4
IDSY 1130

Teaches the fundamental concepts of industrial wiring with an emphasis on installation procedures. Topics include: grounding, raceways, three-phase systems, transformers (three-phase and single-phase), wire sizing, overcurrent protection, NEC requirements, industrial lighting systems, and switches, receptacles, and cord connectors.

4
IDSY 1170

This course introduces and emphasizes the basic skill necessary for mechanical maintenance personnel. Instruction is also provided in the basic physics concepts applicable to the mechanics of industrial production equipment, and the application of mechanical principles with additional emphasis on power transmission and specific mechanical components.

4
IDSY 1190

This course provides instruction in the fundamentals of safely operating hydraulic, pneumatic, and pump and piping systems. Theory and practical application concepts are discussed. Topics include hydraulic system principles and components, pneumatic system principles and components, and the installation, maintenance, and troubleshooting of pump and piping systems.

4
IDSY 1195

This course provides instruction on the fundamentals concepts of industrial pumps and piping systems. Topics include: pump identification, pump operation, installation, maintenance and troubleshooting, piping systems and installation of piping systems.

3
IDSY 1210

This course introduces the theory and practical application for two-wire control circuits, advanced motor controls, and variable speed motor controls. Emphasis is placed on circuit sequencing, switching, and installation, maintenance, and troubleshooting techniques.

4
IDSY 1220

This course provides for hands on development of operational skills in the maintenance and troubleshooting of industrial control systems and automated equipment. Topics include data manipulation, math instructions, introduction to HMI, analog control, and troubleshooting discrete IO devices.

4
IDSY XXXXOccupational Elective Courses 11
Choose one of the following 3
ELTR 1020

Introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

3
IDFC 1012

This course introduces the theory and application of varying sine wave voltages and current. Topics include: magnetism, AC wave generation, AC test equipment, inductance, capacitance, and basic transformers.

3
IDSY 1105

This course introduces alternating current concepts, theory, and application of varying sine wave voltages and current, and the physical characteristics and applications of solid state devices. Topics include, but are not limited to: electrical laws and principles, magnetism, inductance and capacitance.

3
Choose one of the following 3
IDFC 1011

Pre/Co-requisite(s): Provisional Admission Introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety practices.

3
IDSY 1101

This course introduces direct current (DC) concepts and applications. Topics include: electrical principles and laws; batteries; DC test equipment; series, parallel, and simple combination circuits; and laboratory procedures and safety procedures.

3
Faculty
Program Chair

Electronics Technology Faculty Program Chair
School of Industrial Technology
Moultrie Veterans Parkway

800 North Veterans Parkway, Moultrie, GA 31788
Advisor

Mechatronics Faculty
School of Industrial Technology
Tift County High School

52 Tech Drive, Tifton, GA 31794
Advisor

Industrial Systems Technology Faculty
School of Industrial Technology
Tifton

52 Tech Drive, Tifton, GA 31794
Up one level
Programs of Study